Hydraulic motor-driven laboratory presses - MB-L
The hydraulic motor-driven laboratory presses of the model series MB-L are suitable for almost all press works. Characteristic of this type of machine is the stable frame construction.
Technical description:
The hydraulic motor-driven laboratory presses of the model series MB-L are in stable frame - vacuum construction executed.
Equipment:
- Steel heating plates for temperature 200° C fitted with high performance-heating cartridges
- Temperature regulation about electronic temperature regulator with digital temperature indication
- Hydraulic drive, output and driving power adjusted to the dimensions of the press
- Hydraulic control by means of hand-operated control valve for presses with two-hand safety circuit
- The closing speed max. 9 mm/s
- The pressing speed 1-3 mm/s
- The opening speed, approx. 10 mm/s
- The pressing force adjustable by the pressure switch
- Automatic pressure maintenance
- HD-manometer for the indication of the operating pressure
- The supply voltage of the machine is 230 / 400 V 50 Hz
- Electrical control cabinet designed according to the valid regulations of VDI- und VDE, fitted with all required components and operating buttons
- Standard length of the stroke see technical data
Additionally to our standard models we produce also presses with other dimensions, even for the use in the field of production.
If we have aroused your interest, you can contact us at any time by sending us an email.
Technical description:
The hydraulic motor-driven laboratory presses of the model series MB-L are in stable frame - vacuum construction executed.
Equipment:
- Steel heating plates for temperature 200° C fitted with high performance-heating cartridges
- Temperature regulation about electronic temperature regulator with digital temperature indication
- Hydraulic drive, output and driving power adjusted to the dimensions of the press
- Hydraulic control by means of hand-operated control valve for presses with two-hand safety circuit
- The closing speed max. 9 mm/s
- The pressing speed 1-3 mm/s
- The opening speed, approx. 10 mm/s
- The pressing force adjustable by the pressure switch
- Automatic pressure maintenance
- HD-manometer for the indication of the operating pressure
- The supply voltage of the machine is 230 / 400 V 50 Hz
- Electrical control cabinet designed according to the valid regulations of VDI- und VDE, fitted with all required components and operating buttons
- Standard length of the stroke see technical data
Additionally to our standard models we produce also presses with other dimensions, even for the use in the field of production.
If we have aroused your interest, you can contact us at any time by sending us an email.
1 to 6 (from a total of 6)